How can Ansible assist folks constructing simulations with Cisco Modeling Labs (CML)?
Much like Terraform, Ansible is a standard, open-source automation software usually utilized in Steady Integration/Steady Deployment (CI/CD) DevOps methodologies. They’re each a kind of Infrastructure as Code (IaC) or Infrastructure as Knowledge that mean you can render your infrastructure as textual content information and management it utilizing instruments akin to Git. The benefit is reproducibility, consistency, pace, and the data that, if you change the code, folks approve, and it will get examined earlier than it’s pushed out to your manufacturing community. This paradigm permits enterprises to run their community infrastructure in the identical means they run their software program and cloud practices. Afterall, the infrastructure is there to assist the apps, so why handle them in a different way?
Though overlaps exist within the capabilities of Terraform and Ansible, they’re very complementary. Whereas Terraform is best on the preliminary deployment and making certain ongoing consistency of the underlying infrastructure, Ansible is best on the preliminary configuration and ongoing administration of the issues that dwell in that infrastructure, akin to methods, community gadgets, and so forth.
In a standard workflow through which an operator desires to make a change to the community, let’s say including a brand new community to be marketed through BGP, a community engineer would specify that change within the code or extra possible as configuration information in YAML or JSON. In a typical CI workflow, that change would should be accredited by others for correctness or adherence to company and safety considerations, as an illustration. Along with the eyeball checks, a collection of automated testing validates the info after which deploys the proposed change in a check community. These checks will be run in a bodily check community, a digital check community, or a mixture of the 2. That movement may appear to be the next:
The benefit of leveraging digital check networks is profound. The fee is dramatically decrease, and the power to automate testing is elevated considerably. For instance, a community engineer can spin up and configure a brand new, advanced topology a number of occasions with out the probability of outdated checks messing up the accuracy of the present testing. Cisco Modeling Labs is a good software for such a check.
Right here’s the place the Ansible CML Assortment is available in. Much like the CML Terraform integration lined in a earlier weblog, the Ansible CML Assortment can automate the deployment of topologies in CML for testing. The Ansible CML Assortment has modules to create, begin, and cease a topology and the hosts inside it, however extra importantly, it has a dynamic stock plugin for getting details about the topology. That is essential for automation as a result of topologies can change. Or a number of topologies may exist, relying on the checks being carried out. In case your topology makes use of dynamic host configuration protocol (DHCP) and/or CML’s PATty performance, the knowledge for the way Ansible communicates with the nodes must be communicated to the playbook.
Let’s go over a few of the options of the Ansible CML Assortment’s dynamic stock plugin.
First, we have to set up the gathering:
ansible-galaxy assortment set up cisco.cml
Subsequent, we create a cml.yml within the stock with the next contents to inform Ansible to make use of the Ansible CML Assortment’s dynamic stock plugin:
plugin: cisco.cml.cml_inventory group_tags: community, ios, nxos, router
As well as to specifying the plugin identify, we are able to additionally outline tags that, when discovered on the gadgets within the topology, add that machine to an Ansible group for use later within the playbook:
As well as to specifying the plugin identify, we are able to additionally outline tags that, when discovered on the gadgets within the topology, add that machine to an Ansible group for use later within the playbook:
- CML_USERNAME: Username for the CML consumer
- CML_PASSWORD: Password for the CML consumer
- CML_HOST: The CML host
- CML_LAB: The identify of the lab
As soon as the plugin is aware of find out how to talk with the CML server and which lab to make use of, it might probably return details about the nodes within the lab:
okay: [hq-rtr1] => { "cml_facts": { "config": "hostname hq-rtr1nvrf definition Mgmt-intfn!naddress-family ipv4nexit-address-familyn!naddress-family ipv6nexit-address-familyn!nusername admin privilege 15 secret 0 adminncdp runnno aaa new-modelnip domain-name mdd.cisco.comn!ninterface GigabitEthernet1nvrf forwarding Mgmt-intfnip tackle dhcpnnegotiation autonno cdp enablenno shutdownn!ninterface GigabitEthernet2ncdp enablen!ninterface GigabitEthernet3ncdp enablen!ninterface GigabitEthernet4ncdp enablen!nip http servernip http secure-servernip http max-connections 2n!nip ssh time-out 60nip ssh model 2nip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctrnip ssh consumer algorithm encryption aes128-ctr aes192-ctr aes256-ctrn!nline vty 0 4nexec-timeout 30 0nabsolute-timeout 60nsession-limit 16nlogin localntransport enter sshn!nend", "cpus": 1, "data_volume": null, "image_definition": null, "interfaces": [ { "ipv4_addresses": null, "ipv6_addresses": null, "mac_address": null, "name": "Loopback0", "state": "STARTED" }, { "ipv4_addresses": [ "192.168.255.199" ], "ipv6_addresses": [], "mac_address": "52:54:00:13:51:66", "identify": "GigabitEthernet1", "state": "STARTED" } ], "node_definition": "csr1000v", "ram": 3072, "state": "BOOTED" } }
The primary IPv4 tackle discovered (so as of the interfaces) is used as `ansible_host` to allow the playbook to hook up with the machine. We are able to use the cisco.cml.stock playbook included within the assortment to point out the stock. On this case, we solely specify that we wish gadgets which can be within the “router” group created by the stock plugin as knowledgeable by the tags on the gadgets:
mdd % ansible-playbook cisco.cml.stock --limit=router okay: [hq-rtr1] => { "msg": "Node: hq-rtr1(csr1000v), State: BOOTED, Handle: 192.168.255.199:22" } okay: [hq-rtr2] => { "msg": "Node: hq-rtr2(csr1000v), State: BOOTED, Handle: 192.168.255.53:22" } okay: [site1-rtr1] => { "msg": "Node: site1-rtr1(csr1000v), State: BOOTED, Handle: 192.168.255.63:22" } okay: [site2-rtr1] => { "msg": "Node: site2-rtr1(csr1000v), State: BOOTED, Handle: 192.168.255.7:22" }
Along with group tags, the CML dynamic stock plugin may also parse tags to move data from PATty and to create generic stock information:
If a CML tag is specified that matches `^pat:(?:tcp|udp)?:?(d+):(d+)`, the CML server tackle (versus the primary IPv4 tackle discovered) might be used for `ansible_host`. To alter `ansible_port` to level to the translated SSH port, the tag `ansible:ansible_port=2020` will be set. These two tags inform the Ansible playbook to hook up with port 2020 of the CML server to automate the required host within the topology. The `ansible:` tag may also be used to specify different host information. For instance, the tag `ansible:nso_api_port=2021` can be utilized to inform the playbook the port to make use of to succeed in the Cisco NSO API. Any arbitrary truth will be set on this means.
Getting began
Making an attempt out the CML Ansible Assortment is simple. You should utilize the playbooks supplied within the assortment to load and begin a topology in your CML server. To start out, outline the setting variable that tells the gathering find out how to entry your CML server:
% export CML_HOST=my-cml-server.my-domain.com % export CML_USERNAME=my-cml-username % export CML_PASSWORD=my-cml-password
The subsequent step is to outline your topology file. That is a commonplace topology file you can export from CML. There are two methods to outline the topology file. First, you possibly can use an setting variable:
% export CML_LAB=my-cml-labfile
Alternatively, you possibly can specify the topology file if you run the playbook as an additional–var. For instance, to spin up a topology utilizing the inbuilt cisco.cml.construct playbook:
% ansible-playbook cisco.cml.construct -e wait="sure" -e
This command hundreds and begins the topology; then it waits till all nodes are working to finish. If -e startup=’host’ is specified, the playbook will begin every host individually versus beginning them all of sudden. This permits for the config to be generated and fed into the host on startup. When cml_config_file is outlined within the host’s stock, it’s parsed as a Jinja file and fed into that host as config at startup. This permits for just-in-time configuration to happen.
As soon as the playbook completes, you need to use one other built-in playbook, cisco.cml.stock, to get the stock for the topology. With the intention to use it, first create a cml.yml within the stock listing as proven above, then run the playbook as follows:
% ansible-playbook cisco.cml.stock PLAY [cml_hosts] ********************************************************************** TASK [debug] ********************************************************************** okay: [WAN-rtr1] => { "msg": "Node: WAN-rtr1(csr1000v), State: BOOTED, Handle: 192.168.255.53:22" } okay: [nso1] => { "msg": "Node: nso1(ubuntu), State: BOOTED, Handle: my-cml-server.my-domain.com:2010" } okay: [site1-host1] => { "msg": "Node: site1-host1(ubuntu), State: BOOTED, Handle: site1-host1:22" }
On this truncated output, three totally different situations are proven. First, WAN-rtr1 is assigned the DHCP tackle it acquired for its ansible_host worth, and ansible port is 22. If the host working the playbook has IP connectivity (both within the topology or a community linked to the topology with an exterior connector), it will likely be in a position to attain that host.
The second situation exhibits an instance of the PATty performance with the host nso1 through which the dynamic stock plugin reads these tags to find out that the host is obtainable by way of the CML server’s interface (i.e. ansible_host is ready to my-cml-server.my-domain.com). Additionally, it is aware of that ansible_port needs to be set to the port specified within the tags (i.e. 2010). After these values are set, the ansible playbook can attain the host within the topology utilizing the PATty performance in CML.
The final instance, site1-host1, exhibits the situation through which the CML dynamic stock script can both discover a DHCP allotted tackle or tags to specify to what ansible_host needs to be set, so it makes use of the node identify. For the playbook to succeed in these hosts, it must have IP connectivity and be capable of resolve the node identify to an IP tackle.
These built-in playbooks present examples of find out how to use the performance within the CML Ansible Assortment to construct your personal playbooks, however you can too use them straight as a part of your pipeline. In actual fact, we frequently use them straight within the pipelines we construct for purchasers.
If you wish to study extra in regards to the CML Ansible Assortment, you will discover it in Ansible Galaxy in addition to on Github.
You can even discover a full, IaC CI/CD pipeline utilizing these modules right here.
Be part of the Cisco Studying Community at present without cost.
Observe Cisco Studying & Certifications
Twitter | Fb | LinkedIn | Instagram | YouTube
Use #CiscoCert to affix the dialog.
Share:
